Berodach's original cape gets beat up fast. A few months of posing, a little shelf dust, and that factory soft good starts looking rough. It happens to almost every ogre-scale figure in the Mythic Legions line eventually.
The good news: you don't need to hunt down another $80 figure just for a fresh cape. Third-party Berodach ogre scale accessories exist, and some genuinely improve on the factory design. Others don't. We'll get into which is which.
What Comes Standard with Berodach
Berodach ships with a basic fabric cape that's functional but unremarkable. The original uses thin polyester. It wrinkles. It sags. It doesn't hold dramatic poses without help.
Here's what's in the box:
| Included Item | Material/Spec | Notes |
|---|---|---|
| Cape | Polyester, ~6 inches long | Dark brown, prone to wrinkling |
| Shoulder armor (x2) | Bronze-finish plastic | Cape attachment pegs included |
| Weapons | Mace, sword | Ogre-scale grip sections |
| Hands | Gripping + relaxed pairs | 8mm wrist peg diameter |
| Helmet | Plastic, removable face guard | — |
| Belt | Molded pouches | Non-removable |
| Leg armor | Segmented plastic | Ogre-scale fit only |
The cape attaches via small fabric loops that slip over raised pegs on the shoulder armor. It works. Until it doesn't. Those loops stretch out over time, and collectors on forums have reported loose attachment within six months of regular handling — not universal, but common enough to plan around.
Four Horsemen Studios built Berodach as part of their Mythic Legions line, following the same 9-inch ogre-scale proportions as Gorgo Aetherblade and Thord. That shared scale is exactly why Berodach ogre scale accessories from other releases tend to fit without modification.
Fist Compatibility and Weapon Swapping
Berodach uses the same hand system as other ogre-scale figures. Wrist pegs measure 8mm in diameter, a spec that matches most Mythic Legions ogre hands on the market.
You can swap in fists from:
1. Other ogre-scale figures (near-perfect fit) 2. Some 7-inch standard figures (loose, workable in a pinch) 3. Third-party hands sized specifically for 9-inch figures
Weapon compatibility gets trickier. Grip strength on Berodach's hands handles his included weapons fine, but lighter pieces from standard-scale figures tend to slip out mid-pose. His hands grip best with sections in the 3-4mm range.
Two-handed swords from other ogre releases fit well. So do most maces and clubs from Mythic Legions weapon packs. Thin daggers or rapiers? Skip them unless you're willing to add museum putty for grip assistance.
The Two-Headed Ogre Variant Mystery
Collectors ask about a "two-headed Berodach" often enough that it deserves its own section. This confusion traces back to early concept art showing alternative head designs that never made production.
The reality is simpler: Four Horsemen released one version of Berodach. Full stop. Some collectors customize their figures with heads pulled from other characters, and the most popular swap uses Gorgo Aetherblade's alternate head for a more savage look.
These combinations aren't official variants. They're fan modifications that spread through collector communities on Reddit and figure forums, and the photos look convincing enough that newcomers assume they've found a rare factory piece. They haven't.
If you want the look, source an extra head yourself. Neck joints stay compatible across the entire ogre-scale line.
All-Stars Edition Differences
The Berodach All-Stars figure includes upgraded accessories absent from the original release, and the differences aren't subtle once you handle both side by side.
| Component | Original Release | All-Stars Edition |
|---|---|---|
| Cape material | Thin polyester | Heavier cotton blend |
| Weapon count | 2 pieces | 4 pieces |
| Extra heads | None | 1 alternate expression |
| Shoulder armor | Basic bronze | Weathered bronze, added detail |
| Original price | $45 | $65 |
| Availability | Sold out 2019 | Limited 2023 run |
The All-Stars cape holds poses without constant fussing. The attachment loops use reinforced stitching that outlasts the original by a wide margin, at least based on collector reports circulating since the 2023 run sold out.
Here's the catch, though: All-Stars figures disappeared fast, and aftermarket listings now run $120-150. That's a steep price for cape improvements alone. Honestly, if you're only after the better cape, buying a full $150 secondhand figure just to get the soft goods makes little financial sense — a dedicated replacement cape or a similar option from browsing available weapon and armor packs costs far less.
Size Differences: Ogre vs Standard Scale
Action figures in the Mythic Legions line come in two scales, and mixing them up when buying accessories wastes money fast.Standard scale figures measure 7 inches and represent human-sized characters like knights, elves, and orcs. Ogre-scale figures like Berodach stand 9 inches and represent larger creatures — trolls, ogres, giants.
The size difference affects more than height:
1. Shoulder width increases roughly 40% 2. Wrist peg diameter grows from 6mm to 8mm 3. Weapon grips need thicker sections to stay seated 4. Cape length requires about 30% more fabric 5. Armor pieces won't interchange between scales at all
This scaling system keeps the line proportionally consistent internally. But it limits cross-compatibility hard. Try putting a standard knight's cape on Berodach and it looks like a napkin tucked into his collar.
Customizing and Replacing Soft Goods
Original Mythic Legions capes wear out faster than the figures they're attached to. The fabric pills. Colors fade under display lighting. Those attachment loops stretch beyond usefulness within a year of regular repositioning.
Replacement options break into three rough categories:
Official parts. Four Horsemen occasionally sells accessory packs, but soft goods rarely appear in them. When they do, expect $15-25 per cape with limited color choices. Mass-produced alternatives. Generic figure capes from toy supply companies run $8-15. They rarely fit right — the attachment systems don't match Mythic Legions' peg design, so you're stuck rigging your own loops. Handmade replacements. Independent craftspeople sew capes sized specifically for Mythic Legions scales. Quality swings wildly here, from flat fabric rectangles to pieces with internal wire framing built for posing.Handmade offers the most flexibility for anyone assembling a full set of Berodach ogre scale accessories. Choose the color, the weathering, even the wire gauge. Prices range from around $20 for basic versions to $60 for elaborate builds with multiple wire points.
Measure shoulder width before ordering anything. Berodach needs roughly 4 inches of cape width to drape without looking pinched.
Posing Tips for Better Cape Drama
A good cape turns a static pose into a scene. Getting the drape right takes a few tries, though. Don't expect perfection on attempt one.
Start with the attachment. Shoulder pegs need to sit flush, or the cape pulls sideways and ruins the silhouette. If loops have stretched, threading thin wire through them tightens the fit without replacing the whole piece.
For action poses, bunch the cape on one side to suggest movement. Straight-down draping reads as formal and static — fine for a throne-room pose, wrong for combat.
Wire-frame capes give the most control. Shape wind-blown effects. Add dramatic swirls. Even fake battle tears if you're going for a weathered look. The internal wire holds these shapes without the constant readjustment fabric-only capes demand.
Avoid humid display rooms. Fabric absorbs moisture and slowly loses its shape, sometimes permanently. A climate-controlled room keeps soft goods looking sharp for years instead of months.
Photography and Display Considerations
Capes photograph differently than hard plastic parts. The texture catches light in ways that can flatter a shot or wash it out completely.
For diorama photography, side lighting shows fabric texture better than front lighting does. Front light flattens the weave; side light reveals every stitch.
Dust settles on fabric faster than on plastic. A soft brush handles most cape materials, but check the fabric type before cleaning — some synthetic blends attract static and need an anti-static spray first.
Long-term display stresses fabric differently than plastic joints. Skip extreme stretches that could tear or permanently deform the material. Rotate poses every few months to prevent fabric memory from setting in.
Frequently Asked Questions
Do they make fists for ogre-scale characters like Berodach? Yes, though options stay limited. Four Horsemen includes gripping hands with most ogre figures, and a handful of third-party makers sell fist sets sized for 9-inch figures. Wrist pegs measure 8mm across the ogre-scale line. What is the two-headed ogre variant people mention with Berodach? There's no official two-headed Berodach. The confusion comes from fan customs using alternate heads sourced from other figures, most commonly Gorgo Aetherblade's extra head for a rougher look. What accessories come with the Berodach All-Stars figure? All-Stars includes an upgraded cotton cape, two extra weapon pieces, an alternate head, and enhanced shoulder armor detailing. It costs $20-30 more than the original when available new. Is Berodach compatible with other Mythic Legions weapons? Mostly, within the ogre-scale line. His 8mm wrist pegs fit standard ogre weapons fine, but lighter pieces built for 7-inch figures tend to slip. Stick with maces, axes, and two-handed swords for a secure fit. How big is Berodach compared to standard Mythic Legions figures? Berodach stands 9 inches versus 7 inches for standard-scale figures. He's also roughly 40% broader at the shoulders and uses thicker weapon grips, so accessories don't cross-swap between scales. Can you repose or customize Berodach's cape? The stock cape has limited pose-holding ability because the fabric is thin. Wire-frame replacements hold shapes far better and can be bent for wind-blown or dramatic effects that stay put on the shelf. Where can I find replacement capes for Mythic Legions ogre-scale figures? Official parts are rare and inconsistent. Third-party options range from generic toy capes ($8-15, often poor fit) to custom handmade pieces ($20-60) built specifically for ogre-scale proportions. Quality varies a lot between sellers, so check reviews and photos before ordering. What's the difference between ogre-scale and standard scale in Mythic Legions? Ogre-scale figures stand 9 inches tall with 8mm wrist pegs and represent large creatures. Standard scale is 7 inches with 6mm wrist pegs for human-sized characters. Accessories generally don't interchange between the two. Are third-party Berodach ogre scale accessories worth the cost compared to official parts? Often yes, especially for capes. Official soft goods rarely appear as standalone purchases, and when they do, they're the same thin polyester that wears out originally. Third-party handmade options, particularly wire-framed capes, tend to outlast stock parts by a wide margin — though pricing runs higher than the $8-15 generic alternatives.What You Should Actually Buy
Original Berodach capes don't age well. Plan on replacing that soft good within the first year if you display or photograph the figure regularly.
The All-Stars version solves the cape problem outright but costs roughly double on the aftermarket. For most collectors, that math just doesn't work.
Third-party handmade capes split into two camps: cheap and functional, or pricier and genuinely impressive. The middle ground barely exists. You'll spend $20 on basic fabric that beats stock, or $40+ on something that actually elevates your display shelf.
Wire-frame construction makes the biggest practical difference. Those pose-holding properties justify the extra cost if you photograph figures often or swap displays every season.
For collectors dealing with a worn cape or chasing better display options, a handmade wire-frame cape runs around $34 — a middle price point between throwaway alternatives and premium custom builds. You can also browse ogre-scale hand and weapon accessories if you're rebuilding more than just the cape.
